Concealed Vertical Rod Flush Bolts
This 4.0-minute video shows you just how easy it is to change out top and bottom mounted flush bolts on narrow stile aluminum doors. These are the flush bolts that have the activation lever on the leading (lock side) edge of the door.
Find out how to quickly and easily replace these flush bolts in under a half an hour and put some serious shekels in your pocket. These flush bolts are a great “add-on” sale that helps you to easily increase the size of your ticket.
Stop leaving money lay on the sidewalk. Buy this video and start making more money installing flush bolts.
$9.99
Time: 4:0 Minutes
Deactivating An Overhead Concealed Closer
In a little over eight minutes I will show you, with this video, how to deactivate an overhead concealed closer using National Door Controls Deactivator Kit. Simply install the kit, add a surface mounted door closer, collect your money and go home.
After you view this video and then actually install one of these kits, you will find out why I have, in all of my aluminum stile door service articles, urged locksmiths to add door service work to their agenda.
Open the door to increased earnings by expanding your menu of services simply by telling your customer: “I Can Fix That!”
$9.99
Time: 8:25 Minutes
Herculock: The fastest, easiest, way to secure a herculite door in an emergency.
Herculite doors are those humongous glass doors you see in malls and on various commercial buildings. They can easily weigh about four hundred pounds each and the locking mechanism is in the bottom rail and can be almost impossible to service without taking the door down.
Most often, when you are called to service one of these doors it is “0” dark-thirty and everyone is in a hurry to get home.
The Herculock by GKL Products (Hinge Doctor) takes the hassle out of securing a Herculite door. With a Herculock, you can secure the door in about ten minutes without any strain or aggravation. Best of all, installing the Herculock does not require any modifications to the existing door!
That means you can come back the next day and do the actual service work or have a glass company do it for you if you don’t want to tackle the problem. The Herculock gives you the ability to make quick work of securing one of these troublesome doors; and this video shows you how to do it!
$9.99
Time: 6:50 Minutes
JAKE JAKUBUWSKI PRESENETS: KWIKSET SMART KEY #2
This video explores the use of Kwikset’s Cradle, for changing the combination on these cylinders when a SartKey is not available. The video also examines using Major Manufacturing’s Torque Tool and even a specially modified KWI key blank to overcome the SmartKey cylinder without the use of a key or the KW Cradle.
There are millions of these cylinders in play in the marketplace and everyone of them is potential problem waiting to happen and, consequently, a profitable service venue for the locksmith who is equipped with the knowledge and the tools t handle those problems in a professional and competent manner. This 12:00 minute video can give you a head start on servicing these locks and is available here for...
Only $9.99
Jake Jakubuwski Presents Bypassing SecureKey
This fourth, and final, special packaging of SmartKey and Secure Key customer resettable lock servicing and bypassing is another “two-for-one” offer that will round out your downloadable, electronic files.
When you buy this special offer for only $9.99, you get a PowerPoint presentation AND a full-length video on bypassing the Secure key! Like my other offerings in this series, the information is taken directly from real locks that I worked with, in real-time on real doors. Good, solid information that you can put to use right now, to make more money today!
So, order this special twofer and get twice the info, twice the knowledge and twice the money-making potential in instantly downloadable files for a single price of just
$9.99! …That’s a bargain at twice the price!
JAKE JAKUBUWSKI PRESENTS: INSTALLING AND SERVICING THE WEISER SMARTKEY
The Weiser SmartKey, as far as rekeying goes is not different then a Kwikset SmartKey. The unique aspect of this video is that the Weiser lever handle comes apart differently and that feature alone, makes for a more interesting service procedure.
The SmartKey, if my memory serves me well, was first introduced in Canada and it was introduced under the Weiser brand. In fact, the first SmartKey cylinders I got to play with were from a Weiser lever set and sent to me from a friend in Canada. This 13:37 minute duration video takes you through some aspects of SmartKey that you may be unfamiliar with and gives you a complete install and service overview in a instantly downloadable file for...
Only $9.99
Jake Jakubuwski Presents: Bypassing SmartKey
the advent of this radically different customer resettable lock, it was not only necessary to develop new information on service these locks, retrieving lost combinations and installing the locks for customers — it also became necessary to develop new ways to bypass these locks and overcome any perceived security that might be implied by their advertised strength and bump and pick resistance.
In this special package, I have put together BOTH a PowerPoint presentation AND a video on bypassing Kwikset’s SmartKey. This double barreled manual on getting around lost combos and defeating the lock itself is packed full of real-time information that you can use to make money.
By ordering the TWO items together, you get them BOTH, as instantly downloadable files — directly to your hard drive for only $9.99That’s a deal you can’t beat! Two great sources of information for the price of one!
JAKE JAKUBUWSKI PRESENTS: DEACTIVATING A RIXSON FLOOR CLOSER
Replacing a concealed floor closer can be a drawn-out, dirty and frustrating job that can take a lot of time and a lot of effort. It can be a job that is frustrating enough to keep many locksmiths from even considering it.
But in this 12:125 video I will show you how to install a pivot deactivator from NDC, install a surface mounted closer in about an hour — all without having to remove the old closer from the floor! Just leave it where it is and get the door back in operating condition in an hour, or less!
Pivot deactivators are your ticket to a bigger paycheck. With NDC’s line of pivot deactivators you no longer have to leave money laying on the sidewalk because you think “fixing” these closer is too complicated, or too hard. Get this video and find out how you can make more money every week! This video is downloadable directly to your hard drive, laptop, kindle or other device for just,
$9.99! Get yours today!
JAKE JAKUBUWSKI PRESENTS: FINDING A LOST COMBO ON L-1000
If I had to guess, I would say that there were more 1000 and L1000 mechanical digital locks sold then any other kind from their introduction by ILCO until late in the 20th Century. Even today, they are still a popular lock and few locksmiths have not encountered them at one time or the other.
One of the most common service problems that I have found regarding these locks is a lost combination. This video takes the mystery out of finding a lost combination for these locks, shows some bypass methods and how to reset a combination to put a 1000 or L1000 back into service.
Don’t let a lost combination prevent you from servicing the Simplex 1000 or L1000 — download this video to your computer now for only $9.99
JAKE JAKUBUWSKI PRESENTS: ILCO'S 129-90 PANIC EXIT DEVICE
In 2011 ILCO jumped into the storefront hardware business with both feet. This video (Duration 8:25) details the installation of ILCO’s 129-90 panic exit device.
As you will see from this video the 129-90 (rim mount device) foes on easy, looks good and can be a solid money-maker for you.
$9.99
Jake Jakubuwski Presents: Inside Kwikset’s SmartKey
Originally, many locksmiths believed that this user resettable lock was going to spell the end to many of their lucrative residential and light commercial jobs. After all, Kwikset tells the end user that resetting their own locks Is as easy as 1-2-3. In reality, end-user resettable locks open entire new service venues and new lock sales to the locksmith who understands the working of these radically different locks.
This Power Point AND video takes you inside Kwikset’s Smartkey and shows you their strengths (few) and their short-comings (Many) and how you can make money opening these locks, servicing them and even selling new locks to customers because of the potential problems they will have with SmartKey.
This money-making POWER POINT AND VIDEO is yours for only $9.99 and is downloadable directly to your computer!
Jake Jakubuwski Presents: Inside Schlage’s Securekey
It didn’t take long for Schlage to jump into the end-user, resettable lock sandbox with their SECUREKEY. The convenience that they offered the customer with their “Blue Key” reset key and end-user key change capability was, as far as marketing is concerned, a solid competitive answer to Kwikset’s offering. However, in my opinion it was an even less then stellar product and fraught with even more surprises for the customer.
Schlage no longer makes the SecureKey, but while they did, their retailers sold a blue zillion of them and there will probably be SecureKey locks for locksmith to service, rekey and replace for years to come.
This Power Point presentation AND video takes you inside of the Schlage SecureKey and shows you how they work and how you can increase your shekel intake servicing them. In this special offer you get BOTH the PowerPoint AND the video for ONLY $9.99! BOTH files are directly downloadable to your computer’s hard drive!
JAKE JAKUBUWSKI PRESENTS: PIVOTS ARE PROFITABLE
Pivots can make you money! Pivots are profitable. In a majority of instances when you’re called to service a lock on an aluminum stile (Storefront door) there’s nothing wrong with the lock! The most common door “problem” on aluminum stile doors is the pivots.
They are worn, wracked, twisted or bent and need replacement! And, as you will find out in this 18-minute video they’re simple, easy and fast to replace! You can do it with the tools you already have and you don’t need any special skills. If you ever put a butt hinge on a door, or a hinge on a cabinet, you CAN service and install pivot hinges.
In this 18-minute video, I show you how to remove and install top pivots, intermediate pivots and bottom pivots! You can download this profitable video for just $9.99! It’s downloadable at the speed of your computer. Do it now!
$9.99
JAKE JAKUBUWSKI PRESENTS: THE ADAMS RITE DUAL FORCE 2190
The 2190 is an easy to use and easy to install latch and Deadbolt combination that brings a new level of convenience, security and good looks to narrow, medium and wide stile aluminum doors.
This nine and a half minute video shows the 2190 being installed on a narrow stile door. Catch up with the new hardware that Adams-rite has to offer with this instantly downloadable (Directly to your hard drive) from PURE JAKE BOOKS & VIDEOS for only,
$9.99
JAKE JAKUBUWSKI PRESENTS: THE MAGIC OF GKL'S SNAP-IN
If you’ve ever read anything that I have written, you probably know that I am not shy about telling you what I think about products that I have used, believe in and KNOW that they are money makers!
GKL’s Snap-in Bridges are among those products! If you’ve ever taken a lock out of an aluminum stile door and found out that the threads in the back of the stile were stripped and you needed to jury rig a way to support the lock, you know what I’m talking about!
In this 16:44 minute video I show you, using a clear plastic stile, just how quickly you can solve the problem using GKL’s Snap-in Bridge. They are easy, fast and permanent! For just $9.99 you can download this informative video to your computer and start a whole new way of making money!
$9.99
Kwiksets Smart Key Volume One
Resettable locks are not new to this industry. Yet, the Kwikset Smart Key seems to have created more concern then any other resettable seems to have caused. This seven-minute video shows you how to “change” the combination and what to do when a combination is “lost”.
This is a quick guide to how you can handle these locks. And, believe me, there will be lots of them to service because folks who have installed this lock on their doors are going to get into trouble trying to reset the combination and are going to call locksmiths to solve the problem. I believe this lock is a ready made money making opportunity for the locksmith and you can get ahead of the curve by instantly downloading this video to your computer.
NOTE: There will be two more videos to this series for the SmartKey. They are scheduled to be released later this year.
$9.99
Time: 7:0 Minutes
Lockey's Digital Lock - Combination Change
Too often when I write, talk about, or demonstrate a service procedure on a product; I have a brand-new, just out-of-the-box lock or piece of hardware. This video is a radical departure from that “new” lock syndrome. The lock I’m going to show you in this video was installed by me on a residence about 15 years ago!
It is the DIGITAL lock by LOCKEY of Mt. Pleasant, MI.
It’s obvious from the photograph that this lock has seen some heavy use. It’s also notable that the lock is still functioning as well as it did when I first installed it.
My purpose here is to show those of you who are not familiar with this type of lock how to change the combination; or determine a “lost” combination by simply looking at the backside of the outside portion of the lock.
This is a tough, well-built mechanical digital push button lock that is easy to service and simple to work on.
$9.99
Time: 11:25 Minutes
Major Manufacturings Extension Kit And Drill Guide
It doesn’t happen often but when it does you’re stuck trying to make a standard cylinder reach beyond its proper length. The door is thicker then normal and you need to find a way to fit a cylinder to the door.
Up until about the late 60s, Corbin, Russwin, McKenney and others made adjustable cylinders. After they ceased making those cylinders if you had a door that was an odd thickness you had to order specially made cylinders, which were expensive.
MAJOR MANUFACTURNG has come out with a cylinder extension kit and drill guide that will allow you to custom make odd-ball length cylinders right on your truck or in your shop!
This 7-minute video shows you how they work and how easy it is to solve what otherwise could be a real problem: especially with some of the new and thicker doors being manufactured today.
$9.99
Time: 7:0 Minutes
Replacing An Overhead Concealed Closser
Too many locksmiths are reluctant to replace a surface mounted closer because they feel insecure about working with closers. Even more locksmiths shy away from replacing an overhead concealed closer. As a result they often leave hundreds of dollars in business lying on the sidewalk for another locksmith or door service company to pick up.
I understand that reluctance because until I replaced my first overhead concealed closer I thought it was too hard and would take too long. I also thought I might “mess something up” and create more problems then I solved.
I was wrong! And this video not only shows you how it is done but how easy it is to do it. If you’re a locksmith, you already have the mechanical skills to do it. You already have the tools to do it. Even a maintenance person will learn how easy it is by viewing this INSTANTLY downloadable video.
$9.99
Time: 11:09 Minutes
Stabilizing Stiles And Rails On Narrow Stile Doors
From time-to-time every locksmith, maintenance person or door service technician is going to be faced with a door that needs replacing but because of budget restraints that door has to be restored rather then replaced. This video covers just such a situation and shows how the stiles and rails were stabilized rather then installing a new door.
When doors are in a state of disrepair, like this one was, it is ALWAYS better to replace the door — until the customer or facilities manager says they can’t afford it. Then, it’s time for you to say, “I Can Fix That!”
$9.99
Time: 7:25 Minutes
Steve Goldstein’s $100,000.00 screw!
Steve Goldstein, of Hinge Doctor fame, says that the Glass Jack screw, found on aluminum stile doors has made him $100,000.00 over the last 35 years! This screw can, if you know how to make it work for you, allow you to raise a sagging aluminum stile door up to 3/8”. It can be a really easy “Quick Fix” that is pure profit.
This video shows you how to find the screw, how to “adjust” it and tells you what you SHOULD NOT do when you use this old/new service technique on a narrow stile aluminum door.
This is another instantly downloadable video that can make you a lot of money. In fact, one proper adjustment of this screw will gross you about $35.00. So, the first time you use this technique you will have more then recovered your investment!
$9.99
Time: 6.50 Minutes